- Dimensions: 3" x 1.75"OD x 1.25" ID
- Includes 1 roller bearing
-
The JBR-RB is the Replacement Roller Bearing for all JB series Concrete Buggies. -
The ACC-501 is the replacement washer and pin for all Georgia Buggy JB series concrete carts.- Includes 2 washers and 2 cotter pins (1 set for each wheel)
-
The SWKR-A is the replacement wheelbarrow tray (Component A) for the Kit Form Wheelbarrow. -
The ACC-166 is a Top Locking Caster Brake.- Brakes the caster from rolling when lever is depressed
- Accessory for and bolts on 8" swivel casters
-
The BRC-75R Brick & Block Cart prongs are the replacement prongs to the BRC-800 Brick & Block Cart.- Two 7.5" long block prongs
-
The PS-30 is a set of Corner Steel Stakes for the PSC series Pipe Stake Cart or the FWT Trailer series.- 1 set of 4 steel stakes
- For insertion into pipe wells to secure loose loads
- Extends 30" above deck
- 33.5" L x 1 1/4" DIA.
-
The Pushbar handle is a replacement component for all PC, CC, and FDH Series Carts.- Available in 24"W
-
Spacer Kit - FWT Series 16" tire to 18" tire conversion spacers. ** Includes Qty FOUR ยพ spacers. -
The Hopper Safety Lock is a separate lock for the DH Self Dumping Hoppers that prevents the hopper from unintentionally dumping when travelling over uneven or rough ground.- Designed to secure the hopper latch in a fixed position
- For use with Jescraft dump hopper units with a date of manufacture on or after 1/24/2022.
-
The SWKR-E is the replacement wood wedge (Component E) for the Kit Form Wheelbarrow. -
The MPCR-4S is the Corner Steel Stakes for the FWT Four Wheel Utility Trailer and the FXT Four Wheel Trailer Extension Kit.
- 1 set of 4 steel stakes
- For insertion into pipe wells to secure loose loads
- 19.25" L x 1 1/4" DIA.
-
The DHR-TS is the replacement torsion spring for the DH Self-Dumping Forklift Hopper and the DHM Self-Dumping Mobile Hopper lines.- Includes one 4" torsion spring
-
The DHR-RHA is the replacement rear hook assembly for the DH Self-Dumping Forklift Hopper and the DHM Self-Dumping Mobile Hopper lines.- Includes hook and lever welded assembly
- Cable release and torsion spring sold separately.
-
The DHR-CR is the replacement cable release kit for the DH series Self-Dumping Forklift Hopper and the DHM series Self-Dumping Mobile Hopper.- Includes pull handle, cable and oval compress
-
The Upright Rail is the replacement rail component for the PM series Panel Mover Cart.- 36"L to fit the PM-3628 series Panel Mover Cart only
-
The SWKR-M is the replacement fasteners (Component L) for the Kit Form Wheelbarrow. -
The SWKR-L is the replacement leg brace (Component L) for the Kit Form Wheelbarrow.ย Each brace sold individually and not as a pair. -
The SWKR-K is the replacement leg (Component K) for the Kit Form Wheelbarrow. -
The SWKR-H is the replacement tray brace (Component H) for the Kit Form Wheelbarrow. -
The SWKR-G is the replacement nose guard (Component G) for the Kit Form Wheelbarrow. -
The SWKR-D is the replacement long stay (Component D) for the Kit Form Wheelbarrow. -
The SWKR-C is the replacement short stay (Component C) for the Kit Form Wheelbarrow. -
The SWKR-B is the replacement steel handle (Component B) for the Kit Form Wheelbarrow. -
The SWRK -620J is the replacement "J" axle bracket for the SWK-620 Kit Wheelbarrow. -
The SWRK -620I is the replacement "I" axle for the SWK-620 Kit Wheelbarrow. -
The SWRK -610J is the replacement "J" axle bracket for the SWK-610 Kit Wheelbarrow.ย This replacement part is sold as a pair. -
The SWRK -610I is the replacement "I" axle for the SWK-610 Kit Wheelbarrow. -
The ACC-520 is the replacement washer and cotter pin kit for the FWT Four Wheel Utility Trailer wheels.- Includes four 1/8" thick x 2" diameter washers
- Includes four cotter pins
-
The SCR-HDW Scraper Replacement Hardware Kit includes the nuts and bolts required to secure the scraper blade to the blade head. Includes:- Quantity 3 hex head bolts: 3/8-16" x 3/4" long
- Quantity 3 hex nuts: 3/8-16"
-
The DHR-PRA20 is the replacement push rod assembly for the DH-20 and DH-30 series Self-Dumping Forklift Hoppers.- Includes 1 push rod, 1 clevis pin, and 1 cotter pin
-
The DHR-AS is the replacement arc shaft for the DH Self-Dumping Forklift Hopper for the DH-10, DH-20, and DH-30 series models. -
The DHMR-HPK is the replacement hinge pin for the DHM Self-Dumping Mobile Hopper.- Includes one single hinge pin
- Includes one cotter pin
-
The ACC-158 is the replacement bearing for a 10" Semi-pneumatic tire.- 5/8" ball bearing
- Zinc plated
-
The ACC-128 is a Multi-position Caster Lock.- Features a pin which locks the swivel action of the caster in one of four positions (does not serve as a caster brake)
- Serves as an accessory for and bolts on 8" swivel casters
-
The BRCR-A is the replacement axle for the BRC-800 Brick & Block Cart. -
The BRC-15R is long block prongs, an optional componenet for the BRC-800 Brick & Block Cart. These longer prongs offer the ability to stack items with greater depth.- Two 15" long block prongs
-
The ACC-516 is the replacement "D" pin for the Barrel Cart (Model # BC-200-4SBK), securing the cage to the cart. The ACC-516 also replaces the "D" pin for the Perimeter Warning Line System (Model #PWS-100-S), securing the stanchion to the base.- Zinc plated steel pin
- Features wire lock round retainer
- 5/16" Dia. x 1 3/4"L